Payment & Shipping Terms:
|Dots:||128*64||LCD Type:||FSTN, Positive, Transflective|
|Module Size:||50.3x 39.3 X7.0||Viewing Area:||44.0 X 29.0|
|Dot Size:||0.29 X0.36||Dot Pitch:||0.32 X 0.39|
|Backlight:||White LED||Interface:||8Bit MCU, FPC 30PIN, Pitch:0.8mm|
lcd cog display,
spi lcd module
Customized 128x64 Graphic LCD Screen COG FSTN LCD Display With 8Bit MCU Interface
* It is a monochrome COG LCD display and Chip on Glass LCD Module.
* It is composed of a monochrome LCD, driver IC, FPC and backlight unit.
* It is available in various LCD panel colors including gray, yellow/green and blue LCD options.
* It is Standard and Ready-made graphic LCD.
* Experienced Team for Your Custom Solution.
* RoHS compliant.
|Module size(W*H*T):||50.3x 39.3 x7.0|
|Viewing Area(W*Hmm):||44.0 x 29.0|
|Dot size(W*Hmm)||0.29 x0.36|
|Dot Pitch(W*Hmm)||0.32 x 0.39|
|Controller:||ST7565P or equivalent|
|LCD Type:||FSTN, Positive, Transflective|
|Operating Temperature:||-20 ~ +70ºC|
|Interface:||8Bit MCU, FPC 30PIN, Pitch:0.8mm|
Interface Pin Function
|2||/CS1||I||This is the chip select signal.|
|3||/RES||I||When RES is set to “L”, the setting are initialized.|
|4||A0||I||This is connect to the least significant bit of the Norman MPU address bus, and it determines whether the data bits are data or a command.|
|5||WR||I||The data bus are latched at the rising edge of the WR signal|
|6||RD||I||The data bus is in output status when this signal is “L”|
|7-14||DB0~ DB7||I/O||This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.|
|15||VDD||Power supply||Power supply|
|17||VOUT||O||DC/DC voltage converter. Connect a capacitor between this terminal and vss or VDD|
|18||C3+||O||DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal.|
|19||C1+||O||DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1N terminal.|
|20||C1-||O||DC/DC voltage converter. Connect a capacitor between this terminal and the CAP1P terminal.|
|21||C2+||O||DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2N terminal.|
|22||C2-||O||DC/DC voltage converter. Connect a capacitor between this terminal and the CAP2P terminal.|
|23-27||V4~V0||Power supply||This is a multi-level power supply for the liquid crystal drive.|
|28||C86||I||This is the MPU interface switch terminal.|
|29||PSB||I||This is the parallel data input/serial data input switch terminal.|
|Supply Voltage For Logic||VDD-VSS||－||--||3.0||3.3||V|
|Supply Voltage For LCM||VR-VSS||
|Input High Volt.||VIH||－||0.8 VDD||－||VDD||V|
|Input Low Volt.||VIL||－||Vss||－||0.2 VDD||V|
|Output High Volt.||VOH||IOUT=-0.5mA||0.8 VDD||－||VDD||V|
|Output Low Volt.||VOL||IOUT=0.5mA||Vss||－||0.2VDD||V|
Supply Current(No include
1) Duty ratio=1/65, Bias=1/9
2) Measured in Dots ON-state
Other Popular Products:
The list below is our standard offering, please click Model No. into detail informaiton. However, We have many more customized solution and special sizes available as options. Please contact us for more information.
|Dots||Model NO.||LCM Type||Module size
|128*32||RBO12832A||COG||57.0*25.0*2.85||51.0*16.0||0.35*0.39||0.38*0.43||ST7565R||MCU, FPC 18Pin, Pitch:0.8|
|128*32||RBO12832B||COG||56.5*22.9*2.8||53.5*15.4||0.36*0.39||0.39*0.42||ST7567||MCU, FPC 15Pin, Pitch:0.8|
|128*32||RBO12832C||COG||40.0*17.5*2.0||37.2*10.2||0.25*0.25||0.28*0.28||ST7567||SPI, FPC 9Pin, Pitch:0.8|
|128*32||RBO12832D||COG||61.4*30.6*2.9||54.3*18.6||0.36*0.42||0.40*0.46||ST7567||SPI, FPC 28Pin, Pitch:0.5|
|128*32||RBO12832E||COG||46.2*19.2*1.75||43.2*12.0||0.29*0.30||0.315*0.33||ST7567||SPI, FPC 12Pin, Pitch:0.8|
|128*64||RBO12864A||COG||71.3x48.2 x5.3||65.5 x38||0.45 x0.49||0.515 x 0.475||ST7565R||MCU, FPC 36Pin, Pitch:0.8|
|128*64||RBO12864A1||COG||71.3x48.2x5.3||65.5x38.0||0.45x 0.49||0.475x 0.515||ST7565R||MCU, FPC 36Pin, Pitch:0.5|
|128*64||RBO12864B||COG||50.3x 39.3 x7.0||44.0 x 29.0||0.29 x0.36||0.32 x 0.39||ST7565P||MCU, FPC 30Pin, Pitch:0.8|
|128*64||RBO12864C||COG||53.1x 33.3 x2.8||50.1 x 24.0||0.33x0.315||0.36 x 0.345||ST7565R||MCU, FPC 30Pin, Pitch:0.5|
|128*64||RBO12864F||COG||56.4x 37.0 x2.8||53.8 x 28.8||0.35x0.36||0.38 x 0.39||ST7567||MCU, FPC 30Pin, Pitch:0.5|
|128*64||RBO12864O||COG||43.50*33.8*3.5||37.09*23.01||0.26*0.33||0.29*0.36||UC1701X||SPI, FPC 14Pin, Pitch:0.8|
|128*64||RBO12864H||COG||31.0x 22.5 x1.7||29.0 x 16.35||0.18x0.20||0.20 x 0.22||ST7567||SPI, FPC 12Pin, Pitch:0.8|
|128*64||RBO12864X||COG||33.7x30.5x4.0||30.7 x23.0||0.205 x0.308||0.225 x 0.4328||ST7567||SPI, FPC 12Pin, Pitch:0.6|
|128*128||RBO128128C||COG||49.0x55.0x2.8||45.4x43.9||0.275x0.295||0.3x0.32||UC1617S||SPI, FPC 14Pin, Pitch:1.0|
|128x128||RBO128128D||COG||47.85x52.8x2.1||44.0x40.5||0.282x0.282||0.297x0.297||UC1617S||MCU, FPC 22Pin, Pitch:0.5|
|128x128||RBO128128E||COG||55.0x60.2x2.1||48.78x48.78||0.3x0.3||0.32x0.32||ST7541||MCU, FPC 30Pin, Pitch:0.5|
|128x160||RBO128160A||COG||47.5x64.0x2.8||43.9x52.0||0.25x0.27||0.28x0.30||ST7586S||MCU, FPC 26Pin, Pitch:0.5|
|132*64||RBO13264A||COG||77.0x47.5x4.4||72.0x36.5||0.50x 0.50||0.52x 0.52||ST7567||SPI, FPC 10Pin, Pitch:0.5|
|160*160||RBO160160A||COG||83.8 ×76.5 ×9.5||60.0 x60.0||0.32 x 0.32||0.34 x 0.34||UC1698U||MCU, FPC 18Pin, Pitch:1.0|
|160*160||RBO160160E||COG||77.8×76.5×9.0||60.0 x60.0||0.32 x 0.32||0.34 x 0.34||UC1698U||MCU, FPC 18Pin, Pitch:1.0|
|240x64||RBO24064A||COG||126.2x55.1x5.0||111.0x37.0||0.41x0.47||0.44x0.50||ST75256||SPI, FPC 24Pin, Pitch:0.5|
|240x128||RBO240128B||COG||131.5x91.5x11.0||115.0x64.5||0.4x0.4||0.45x0.45||UC1608||MCU, 20Pin Header|
|240x160||RBO240160A||COG||85.0x62.8x2.0||77.58x51.6||0.28x0.28||0.3x0.3||ST7586S||MCU, FPC 25Pin, Pitch:0.9|
|256x128||RBO256128A||COG||77.6x51.3x2.85||71.74x38.46||0.24x0.24||0.26x0.26||ST75256||MCU, FPC 24Pin, Pitch:0.8|
Customized graphic LCD:
* It can be customized for monochrome LCD, backlight, FPC and PCB Board with a little tooling charge, and customized shape is suitable for customer's mechanical design.
* LED backlights are available in various colors including yellow/green, white, blue, and Backlight with different brightness is customized according to your request.
* Including different options of polarizer in reflective, transmissive or transflective types, and also with polarizer positive mode and negative mode options.
* It is available to add a connection board for each item to change the interface from FPC to pins or cables, We can offer a variety of pin out connections to suit your requirements.
* The LCD panel technologies include TN, STN, FSTN, FFSTN types, and are available with viewing angles of 6:00, 12:00, 3:00, and 9:00 o’clock.
* Extensive range of LCD graphic displays with various backlight and LCD type combinations.
|Telecommunication Devices||Telephone, Interphone, Smart Watch, Tablet PC, PDA|
|Consumer Products||Camera, DVD Player, Cell Phone, Game Player, Digital Photo Frame, Ｅ-Book Reader, Mp3 Player, MP4 PMP, Netbook PC|
|Technical Equipment||Elevator Controller, Industrial Machine, Security Ｍonitor, POS|
|Office Automation||Printer, Scanner, Fax Machine, Desktop Monitor, Desktop Monitor|
|Home Appliances||Air-condition Display, Refrigerator, Video Doorbell, Smart Machine|
|Automobile Display||GPS, Protable Navigation, Video Player, Speedometer, Recorder|
|IT Products||Digital Video, Media Player, Advertising Machine|
|Medical Equipment||Ultrasound Machine, Medial Monitor, Medical Imaging, Healthcare|
Packaging & Shipping & Delivery
All the products are packed in right way to keep it safe.
For small sizes of products we use tray + carton,
For bigger sizes we use foam slot + carton.
we also design packages according to customers' requirements
For small quantity orders: we ship by UPS Air-Express, or DHL/FEDEX/TNT/ EMS Express service, it is safe and fast.
For large quantity orders: we ship by buyer's cargo agent in China,
we can also ship by air or sea transportation by our cargo agent.
Ready-made Sample: within 1 week
Custom Sample: 1~2 weeks
Mass production: 3-4 weeks
|Rich experience||Good knowledge of the displays market to put together solutions that add value and provide a unique proposition for the client|
|Advanced Equipment||Full automatic FPC&IC bonding machine, film attaching machine, CNC machine, polish machine advance production equipment ensure product quality|
|Quality Assurance||Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment|
|Fast response||Quickly realize your customized ideas, and have a sample ready in short time|
|Low MOQ||Depends on product|
|Stable supply||1~10 years supply period|
|Extensive range||Providing complete solution from Mono to Color LCD module, Optical bonding between display to cover glass as well as cover glass to touch screen|
|Large production capacity||Operation capacity 2KK monthly|
|Quality guarantee||RoHS compliant|
|Management||ISO 9001:2008, ISO 14001:2004|
Q: How can I get some samples?
A: We don't provide free one, but we can have a discount when you reorder according to different quantity, and you will win at least 3% discount.
Q: What is the MOQ?
A: It depends on different products. Please keep in touch with sales to confirm the MOQ.
Q: How do you control quality?
A: All materials we purchase for making any orders are high quality and RoHS compliant, and Control quality with ISO 9001:2008, ISO 14001:2004 management system.
Advance inspection instrument and equipment to ensure 100% inspection for each and every piece before shipment
h 800*480 Capacitive Touch Screen LCD Display
Q: Does your product have any warranty?
A: Yes, we offer 12 months warranty for our products.
Q: What's your payment method?
A: Payment: T/T, Paypal, Western Union, etc.
For samples: payment in advance.
For mass production: 30% deposit and 70% balance before shipment.
Q: Do you offer custom solution?
A: Yes, we can offer custom solution if standard products couldn't meet buyer' requirements.
Contact Person: Agatha
Tel: +86 13760194392